| |
AMERICAN DOOR TECHNICAL DATA
Wing: 42 mm thick, the surface is 3.2 mm thick and wavy HDF American panel. Inside the air-hole filling of kraft honeycomb filler is used. Around the four sides of the wing 10-12% humidity resistant 35x45mm sized finger-joint fir boom has been returned. Reinforced boom is used to at the place of locks and hinges.
Case: 42 mm thick and 12 mm sized MDF top, middle and bottom 18 mm finger-joint masive panel is the 12 mm MDF. Case was given on the front of the wood texture pattern.
Molding: 10 mm in thickness, 70 mm wide, 2200 mm long is. The surface of the wood moldings Adjustable-pass is little changed.
Paint: Last cellulose paint finish on the two primer layer should be applied.
|
|
